Connect Your Device to the Internet

Ethernet

Locate and Insert Ethernet cable into the LAN Port on the Bottom of the Device.
(Only for VL100/VL100 Pro/VP100 Devices)

WIFI

• VL100/VL110/VP100 Guide – First time booting the device the screen will prompt with “Do you want to Connect to WIFI?”.
After selecting 1.Yes, Connect, select your WIFI SSID, enter the WIFI Password and select OK.
If configured correctly your Terminal will load to your HOMESCREEN.

• VL500/VP500 Guide – First time booting the device the screen will prompt with “Network Error Please Configure in Settings”.
Select Setup to enter the Settings Menu. Select WLAN followed by your WIFI SSID. After entering your WIFI Password select Connect.
Then press the Triangle button to on the bottom-left of the screen to get back to the HOMESCREEN.

Cellular

• VL110 Guide – Upon receiving the device your SIM card should be pre-installed by your ISO into the Terminal.
When you power on the device the Terminal will prompt with “Do you want to Connect to WIFI.”
After selecting 2.No, I Don’t have WIFI your Terminal will now prompt “Do you want to Connect GPRS?”.
After selecting 1.Yes, Connect your Terminal will connect via GPRS and will load to your HOMESCREEN.